Tips From the Moving Company Pros: Ways To Move a Pinball Maker



With pinball making a big renewal throughout the country, Gentle Giant desires to make certain that these classic, gorgeous makers remain damage-free while being transported. Oh, and we want the individuals moving them to be safe, too.

At very first glance, pinball machines can appear daunting to move due to the fact that of their size, weight, and fragility. Fortunately, our proficient Giants have a couple of tricks up their sleeves to ensure your pinball is moved with ease.
Folding Down the Headbox

Most of contemporary pinballs (made in the last Twenty Years approximately) have a hinge system which allows the headbox to be folded down. Early pinball devices had their headboxes bolted on, utilizing either 2 or 4 bolts. All Electro-Mechanical pinballs use this system, along with the early Solid State devices.

Later on makers have hinges and use a latching system to keep the headbox upright. There may likewise be 2 bolts inside as included safety, in case the latch is broken or unintentionally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you have to get rid of the headbox rear access panel to access to the bolts and plugs inside. Typically this panel has a lock on it to keep it in location, however with time the key may have been lost. Frequently, there is a screw keeping this panel in location.

As soon as within, get rid of the bolts and unplug the large ports that have electrical wiring decreasing into the maker. You might desire to label these connectors to put them back in the best spot, however they must be various sizes, making it hard to plug back incorrectly.

You can now remove the headbox completely, or fold the headbox down onto the playfield glass. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in location.
Early Strong State Pinballs

For early Strong State Pinballs, you will need to remove the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the center.

Once unlocked, remove the back glass by lifting it up using the lift channel (at the bottom of the glass), and after that pull it out from the bottom.

Then, open up the back box light panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out towards you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to raise the lamp panel in order to swing it open.

Now that you are inside, you can eliminate the bolts, and any plugs that have wires decreasing into the device. You might wish to identify these plugs to put them back in the ideal area. You might not have to get rid of the plugs, as the circuitry should be long enough to allow the headbox to be folded down.

At this point, you can lock up the lamp panel and replace the back glass.
Modern Solid State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the supplied key, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the device. This is an easy setup and needs no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will likewise assist keep the back glass in location.

If you can not fold the head box down, then you require to get within. There is a lock situated at the top of the back glass in the center. Utilize the provided secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will have to get rid of the display screen panel. You can do this by raising it up and out. Open the light panel. There will be a lock situated on either the left-hand or right-hand side. (Some more recent Williams and Bally pinballs do not have a different amp panel, it becomes part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

Eliminate the 2 bolts, put the back box back together, and fold down the head box onto the cabinet. Ensure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.
Removing the Legs.

Pinball Maker legs are held in location by 8 bolts. The contemporary pinballs have captive nuts or threaded plates inside for the bolts to screw into.

However these threaded plates and captive nuts can be damaged, and using extra nuts may have been required. If this holds true, you will require to open the front door of the pinball, slide out the playfield glass, and raise the playfield.

With the front door (coin door) open, move the lock down bar lock across and eliminate the lock down bar. Slide out the playfield glass, and put in a safe location. Next, raise up the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You must now have access to any nuts that may have been used. Once any nuts have been gotten rid of, change the playfield glass and lock down bar, and lock the front door.

Make certain to mark or keep in mind which legs are for the front and back, as they will be changed differently to suit.
Loading the Pinball.

You are now ready to carry your pinball maker. Prior to you pack it, ensure you remove the pinballs so they don't bounce around throughout transportation.

If you are moving the pinball utilizing a van or SUV, it might be simpler to eliminate the legs just prior to loading the maker. Get a pal to have and help one of you supporting the pinball, while the other removes the front legs. Move the maker in, and after that eliminate the back legs. It is a click here now lot easier to load the maker front initially.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop all of a sudden!

For Electro-Mechanical pinball machines, you need to get rid of the headbox rear gain access to panel to acquire access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

If you are moving the pinball using a van or SUV, it might be much easier to eliminate the legs just prior to loading the maker. Get a pal to help and have one of you supporting the pinball, while the other gets rid of the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *